Introduction to Gantry Car Wash
I. Basic Cleaning Functions (Core)
• 360° High-Pressure Washing: Multiple swing nozzles on the gantry frame cover the car body, tires, chassis, and cargo box/hopper, with a pressure of 0.8–12MPa, washing away stubborn stains such as mud, cement lumps, and coal slag.
• Zoned Detailed Washing:
◦ Chassis: High-pressure nozzles provide directional washing to remove accumulated mud.
◦ Tires: Multi-angle spraying cleans the rims and tire treads.
◦ Car Body: Full coverage of sides and top, leaving no blind spots.
◦ Hopper/Cargo Box: Dedicated nozzles remove construction waste/residue.
• Automatic Start/Stop: Ground loop coil + infrared sensor automatically recognizes vehicles entering (0.5-second response), requiring no manual operation.
II. Intelligent Control Functions
• PLC Programming: Preset standard/fast/deep modes, one-button recall.
• Variable Frequency Pressure Regulation: Automatically adjusts pressure based on the severity of soiling, saving energy and protecting the vehicle.
• Fault Self-Check + Early Warning: Real-time monitoring of water pressure, water level, and motor status; alarms and fault codes displayed for abnormalities.
• Data Networking (Optional): Connects to a smart platform to upload data such as wash frequency, pressure, water/power consumption, and video.
• Unattended Operation: Automatic sensing, washing, and shutdown; available 24/7.
III. Water Circulation and Environmental Protection Functions
• Multi-stage Sedimentation and Filtration: Wastewater passes through a sedimentation tank → filtration → purification, allowing for recycling with a utilization rate >80%. Single wash water consumption is 80–100L, saving 60%+ water.
• Fully Enclosed Overflow Prevention: Enclosure and collection trough prevent wastewater from overflowing, suppressing dust and meeting municipal environmental protection requirements.
• Automatic Sludge Removal: Regularly cleans sludge from the sedimentation tank, eliminating the need for manual sludge removal.
IV. Air Drying and Drying (High-End Configuration)
• High-Pressure Air Drying: Top/side fans provide strong airflow to remove water droplets, preventing icing and rust.
• Winter Drying (Optional): Hot air system provides anti-freezing and rapid drying in low-temperature environments.
V. Safety and Protection
• IP65 Waterproof: Waterproof and dustproof electrical control box and motor, suitable for harsh construction/mining environments.
• 304 Stainless Steel Body: Corrosion-resistant, anti-aging, and long service life.
• Collision Protection: Infrared anti-pinch and gantry limit switches prevent damage from accidental operation.
• Emergency Stop: Emergency stop button for one-button power cut-off in emergencies.
VI. Additional Practical Functions
• Automatic Roller Shutter Door: Automatic opening and closing of both end doors for enclosed operation, heat preservation, and noise reduction.
• Vehicle Vibration Function: Chassis vibration device shakes off adhering dirt (commonly used in construction vehicles).
• Winter Insulation: Whole-machine heat tracing/insulation layer allows normal operation at -30℃.
• Dual-purpose (mobile/fixed): Can be fixed for installation or moved by trailer, suitable for site relocation.
VII. Applicable Scenarios
• Cleaning of heavy vehicles such as construction sites, dump trucks, concrete mixing plants, mines, coal mines, logistics parks, ports, and landfills.
